Skip to main content

What is All Geared Lathe Machine and their essential components?


All Geared Lathe Machine

What is All Geared Lathe Machines? Well, the all geared lathe machine is mainly used for executing various metal shaping tasks in different industries. Also, they have a gearbox with lead screw and feed shaft that increases its machining capacity. And, the wide range of all geared lathe machines includes light-duty, medium-duty, heavy-duty and extra heavy duty. Plus, a light-duty lathe is used for low volume metal shaping tasks in tool rooms, while the medium and heavy duty lathe machines are mostly preferred for bulk metal forming industrial applications.

We at Surelia Industries is one of the leading manufacturers, suppliers, and retailers of a wide customer range of all types of All geared Lathe machine with high quality. And, our all geared lathes can execute turn end faces on cylindrical surfaces, or drill internal holes on different parts, as well as produce metric, inch, module, as well as pitch threads.

Moreover, some of the basic components as found in the modern all geared lathe machine tools are as follows:

1. Bed

This component refers to the base or bottom part of the lathe machine on which various working parts of the lathe including the headstock, tailstock, spindle, carriage slide and much more are placed. Well, just as in any lathe machine, even in all geared lathe, it is the bed of the machine which speaks about its quality.

2. Headstock

Secondly, Headstock is one of the most important components of all geared lathe machine that carries spindle and the mechanism to drive this spindle. And, an all geared headstock is more complicated than an ordinary belt-driven headstock. Also, the gears of an all geared lathe are similar to the gears of an automobile except that these have more gear shifting combinations that enable more changes in speed to be done. Thus, you can adjust your lathe for variant speeds.

3. Headstock Spindle

This is an element of the lathe which is responsible for the cutting tasks of the machine. And, it is this part that drives the workpiece against the cutting tool as well as even drives the carriage that inserts the cutting tool into the workpiece.

4. Tailstock

Moreover, the tailstock is a part of the lathe where the drills, reamers, and drill chucks are held. And, it is this place on the machine that the dead center carrying another end of the workpiece. Also, this can move along the length of the bed to accommodate a workpiece of different lengths.

5. Carriage

Next, Carriage is the component which homes the cutting tool responsible for the cutting of the workpiece. And, it carries the crossfeed slide and the compound rest which holds this cutting tool. Also, Carriage moves along the length of the bed for performing the cutting operation.

Labels:

Comments

Post a Comment

Popular posts from this blog

What is Lathe Machine and how does it work?

  Lathe machine is one of the earliest machinery available today and is also considered the mother of all machines. It is a mechanical device in which the workpiece is rotated against an appropriate cutting tool for producing cylindrical shapes in metal/wood or any machinable material. It performs various tasks like cutting/sanding/drilling with tools that are applied to the workpiece. It is a material removal machine that shapes the part by separating material and is usually used for two-dimensional round work. Working   Principle: A lathe holds the workpiece between two rigid&strong supports called chucks which revolves. It holds the workpiece in place when it spins and is attached to the spindle. The cutting tool is rigidly held in a tool post which is fed against the revolving work . The spindle is operated by an electric motor which can normally be tuned to varying speeds. Now that the workpiece is spinning, an operator can pull up the cutt...
Post a Comment
Read more

Significance of all geared Lathe Machine

There is no denying fact that necessity is the mother of all inventions. Thus all the machines are invented with a single purpose. In earlier days, giving shapes to metal was a tedious job & time-consuming process. Therefore, the invention of the lathe machine made the job of metal shaping much easier. Generally, it is used to remove the unwanted part from the metals to give it a new shape. And, the material is rotated against the tool which trims down the material into shape. However, in olden times, it was operated manually but the machine got many innovative improvements after that. Well, the technological changes brought many versatile changes to a lathe machine . And, there are many products which we use in our daily life using metals of different shapes & sizes. So, the production of all these products has been possible only due to a lathe machine. Thus, every other industry is influenced and it can even perform the complicated process of shaping metals. Therefore, t...
Post a Comment
Read more

Buy the ultimate and high quality heavy duty lathe Machine

  We are the leading Lathe Manufacturer and Supplier Company also one of the foremost heavy-duty lathe machine manufacturers in India, engineering & designing sophisticated types of machinery for dealing with heavier loads. Plus, we provide machines that are designed as well as engineered with powerful machining capacities for turning large metal workpieces.     Further, we offer a heavy duty lathe machine  that is equipped with specialized features like ground headstock spindles as well as robust one-piece planar lathe beds which offer a solid base & simultaneously facilitating the seamless parallel movement of carriage as well as tailstock in alignment with the axis of the spindle. Further, we use alloy steel to provide strength & sturdiness to the machine for lasting durability. Also, a specialized oil pump is used which helps to lubricate the rotating spindles as well as bearings to give more power to the machines by neutralizing the inner frictions ...
3 comments
Read more